Measure the part, not the wiring
LCR meters and ohmmeters for precise impedance, resistance and component characterisation. Measured at the frequency the part will work at, through a four-wire connection so the leads do not end up in the reading, with fixtures to suit what you are testing.
+44 (0) 203 093 0914Pick a type on the left, or read both.
2 of 2 sub-categories
Tell us the components, the ranges and the frequency you work at. We will tell you what fits.
Inductance, capacitance, resistance and the impedance parameters that go with them, at the frequency the part will actually work at.
Micro-ohm to high-resistance measurement, for contacts, joints, windings and anything where the lead resistance would swamp the reading.
Nothing matches that filter. Choose All to see both sub-categories.
Buying an instrument from us comes with the part that is harder to buy: knowing whether it is the right one.
Advice on test frequency, drive level and fixturing, which between them decide whether the same part reads the same twice.
Try an instrument against your own components and fixtures before you commit to it.
SCPI with USB and LAN, and handler I/O on selected models, for production sorting rather than bench measurement.
One year warranty, with optional UKAS calibration arranged at the time of order.
Match it to where the component will actually work. Power capacitors are usually measured at 100 or 120 Hz, general parts at 1 kHz, and RF parts at 100 kHz and above. Keep the drive level appropriate too, or the part heats or biases and the reading moves.
For low resistance, yes. Below an ohm or so the resistance of the leads themselves is a large part of what you are reading, and a four-wire connection measures the part rather than the wiring. Use proper Kelvin clips or a fixture rather than improvising.
Yes. Surface-mount and leaded fixtures, Kelvin probes, and UKAS or traceable calibration. Tell us the size of the parts you are measuring and the ranges you need and we will quote the lot together.
Our engineers are happy to help with specifications, lead times and compatibility.
Call usWe respond within one business day · Monday to Friday, 9am to 5pm
Ask us anything — sales, technical, or order related.
We never share your details. By sending, you agree to be contacted about your enquiry.