Benchtop Multimeter
High-accuracy bench meters for precision measurement, from four and a half digits to six and a half.
- Up to 2,200,000 counts
- Four-wire resistance on two models
- True RMS
- USB and LAN with SCPI
All Products
Multimeters & Accessories
Bench, field and everything between
Benchtop meters, clamp meters and handheld multimeters for laboratory, field and service work. Resolution where you need it, ruggedness where you need that instead, and someone on the end of the phone who has used them.
+44 (0) 203 093 09143Sub-categories
6½Digits, bench
CAT IVField rated
UKASCalibration available
Three sub-categories
Pick a type on the left, or read all three.
Filter by type
3 of 3 sub-categories
Need help choosing?
Tell us the rails, the currents and what you are testing. We will tell you what fits.
Clamp Meters
Non-intrusive AC and DC current measurement, with true RMS, for currents you cannot break the circuit to read.
- AC and DC current
- True RMS options
- No circuit to break
- Field rated
Handheld Multimeter
Rugged meters for diagnostics away from the bench, sealed and rated for the installations they are used on.
- IP67 and double moulded
- CAT IV 600 V, CAT III 1000 V
- True RMS with peak capture
- 4 to 20 mA loop as % of span
Nothing matches that filter. Choose All to see them all.
What you get besides the box
Buying an instrument from us comes with the part that is harder to buy: knowing whether it is the right one.
Accuracy and resolution
Advice on counts, basic accuracy and measurement speed, and which of the three actually decides your result.
Demonstration and evaluation
Try a bench meter or a clamp against your own measurements before you commit to it.
Connectivity
USB and LAN with SCPI and logging on selected models, for benches that record rather than get read.
Warranty and calibration
One year warranty, with optional UKAS calibration arranged at the time of order.
Questions we get asked
What accuracy and resolution should I choose?
For laboratory work, five and a half to six and a half digits with a low basic DC voltage accuracy. For field use, four and a half digits with good true RMS performance is usually enough, and the ruggedness matters more than the last digit.
When do I need a clamp meter rather than a multimeter?
Whenever breaking the circuit is impractical or unsafe, which is most of the time above a few amps and almost always on a live installation. A clamp reads the current through the conductor without disturbing it.
Can I log measurements to a PC?
Many bench meters carry USB or LAN with a SCPI command set, so readings can be logged and the instrument driven from a script. Check the interfaces on the model you are considering, since they differ across the range.
Need help choosing the right instrument?
Our engineers are happy to help with specifications, lead times and compatibility.
Call usWe respond within one business day · Monday to Friday, 9am to 5pm